Indoor Portable Light Economical Plywood Infill Durable Frame House
Stable Boxes
Horse Barn Suggestions
Type of horse stables: To begin with, when building stalls you can choose between box
(loose) stalls and tie (standing) stalls. With box stalls for an
average size riding horse the minimum measurements of the stall
should be at least 3×3 meters to 3,6×3,6 meters. This is only the
minimum standard and it is recommended that you build a bigger
stall if possible. These measurements of horse stables have been
set by the Canadian Agri-Food Research Council, Recommended Code of
Practice for The Care and Handling of Farm Animals. With tie stalls
the minimum measurements are 1,5 meters wide and 2,4 meters long.
The stall should be wide enough so the horse can lie down
comfortably.
Height of horse stables: Furthermore, considering the height of the stalls, a horse stall
should be made from sturdy timber with walls up to 1, 4 meters
high. It is recommended to use a mesh on top of the wooden walls to
help with ventilation and light. This also allows horses to see
each other. Windows also provide natural lighting and ventilation.
Try to use as many windows in the stable design as possible. To
keep the horses from breaking the glass, the windows should be
covered with a strong mesh. Windows that swing open are preferred
over sliders, because the latter might fill with dirt and start
getting stuck, making them uncomfortable to use.
Width of aisles: The aisles between stalls should be at least 3 meters wide. Since
there generally is a manger for hay in front of the tie stall, the
width of the manger should be taken into account while planning the
stall. The horse stall should have a strong structure to tie to.
The structure must also keep in mind that the horse cannot step
over the tie rope, but can still reach food and water.
Doors for horse stables: When planning horse stables, you can choose either sliding or
swinging doors for the horse stalls. The criterions for the doors
are that they should be at least 1,2 meters wide and the latches
should undo easily, but not so easy that the horses can open the
doors themselves. The doors to the grain room should be locked.
Floors for stables: There are many different flooring types available for stables.
Concrete is the most commonly used flooring in horse stables. Since
concrete or stone floors do not drain naturally, you should either
place drains in the stalls or at least avoid ammonia build up by
keeping the stalls well cleaned. Even though hard flooring like
concrete is easier to clean, many people choose to use rubber like
materials for flooring to increase the comfort of their horses. The
easiest flooring is just to leave the earth floor, which can be
warmer and quieter, but also more difficult to clean.
Specifications
| Product Name | 3.65x3.65m Horse Stable Stall Sliding Door Temporary Prefabricated |
| Common Size | 3.0m-4.2m, or 10ft 12ft 14ft or other sizes on request |
| Standard Height | 2200mm |
| Frame | 50x50mm RHS; 102 OD Mid-post |
| Surface Treatment | Black powder coating or hot dipped galvanized(sliver) |
| Infill Material | Economical Options: Plywood, HDPE Heavy Duty Options: Bamboo, Pine |
Fittings | Swivel feeder system (optional) Swing feeder window (optional) Hay Rack (optional) Corner post (optional) Stainless steel latch Decorative caps (Brass or 304SS) |
| Door Style | Hinged/swing or sliding |
| Advantage | Easy connection, NO need of support post |
| Related Products | Horse stall box; Barn door; Barn window; Horse rubber mat; Horse
panel |
| Any other requirements, please feel free to contact us |
JH Steel Company Profile
JHorse has been manufacturing and exporting Full Sized horse stable
stalls with non rusting horse stall components. ALL components are
delivered to our customers ready to install WITH all necessary
hardware and fasteners INCLUDED for installation. NO hardware kits
to purchase and only easy and fast assemble!
It takes approximately 18 fasteners to install an JH Steel Sliding
Door and a 6-12 fasteners to install a front or divider grille. At
JH Steel, we do the majority of the work for you! JH Steel includes
detailed instructions and has a 24 hour dedicated technical advice
service, in the event you have a question after hours or weekends.
